UVW SERIES ERROR CODES

Operation after detection

It is detected that the current of the S reel motor is not normal.

EJECT
(Emergency EJECT)

Display until pressing any button or until inserting a cassette tape again.

It is detected that the current of the T reel motor is not normal.

The S reel FG cannot be detected by FG check when inserting a cassette tape.

Removes cassette tape automatically.

The T reel FG cannot be detected by FG check when inserting a cassette tape.

Neither S reel FG nor T reel FG can be detected by FG check when inserting a cassette tape.

The S reel FG is detected in threading.

EJECT
(Emergency EJECT)

The T reel FG cannot be detected in threading.

The S reel FG is detected in STOP or STILL mode.

The T reel FG is detected in STOP or STILL mode.

The S reel FG and T reel FG are detected in STOP or STILL mode.

It is detected that the tape does not run at the specified speed in F. FWD or REW mode.

Error is remedied, then the unit operates normally.

Displays until pressing any button.

The Slack of the tape is detected in F. FWD or REW mode.

EJECT
(Emergency EJECT)

Display until pressing any button or until inserting a cassette tape again.

The S reel FG cannot be detected in F. FWD or REW mode.

The T reel FG cannot be detected in F. FWD or REW mode.

Neither S reel FG nor T reel FG can be detected in F. FWD or REW mode.

It is detected that the rotations of S and T reel are not normal in F. FWD or REW mode.

The slack of the tape is detected in SEARCH mode.

The S reel FG cannot be detected in SEARCH mode.

The T reel FG cannot be detected in SEARCH mode.

Neither S reel FG nor T reel FG can be detected in SEARCH mode.

EJECT
(Emergency EJECT)

Display until pressing any button or until inserting a cassette tape again.

It is detected that the rotations of S and T reel are not normal in SEARCH mode.

The slack of the tape is detected in PLAY or REC mode.

The S reel FG cannot be detected in PLAY or REC mode.

The T reel FG cannot be detected in PLAY or REC mode.

Neither S reel FG not T reel FG can be detected in PLAY or REC.

It is detected that the rotations of S reel and T reel are not normal in PLAY or REC.

The slack of the tape is detected when unthreading.

The S reel FG is detected when unthreading.

The T reel FG cannot be detected when unthreading.

The S reel FG is detected during removal of a cassette tape.

Until the error is remedied, inhibits inserting a cassette tape.

The T reel FG is detected during removal of a cassette tape.

The S reel FG and T reel FG are detected during removal of cassette tape.

Operation after detection

It is detected that the current of the threading motor is not normal.

EJECT
(Emergency EJECT)

Display until pressing any button or until inserting a cassette tape again.

When detects full top or end of a tape in the threading state and then performs SHORT FF/SHORT REW, top or end is not released.

Removes cassette tape automatically.

Threading is not completed within the specified time.

EJECT
(Emergency EJECT)

Unthreading is not completed within the specified time.

Operation after detection

Display until pressing any button or until inserting a cassette tape again.

Operation after detection

Display until pressing any button or until inserting a cassette tape again.

Operation after detection

Displays until an error is clear up.

Operation after detection

Continues operating in the mode in which the problem is detected. When enters other than PLAY or REC mode, AUTO OFF.

The error is remedied, then the unit operates normally.

In PLAY or REC mode: Continues operating. In other than PLAY or REC mode: STOP. then EJECT.

(Emergency EJECT)

Displays until the error is remedied and pressing any button.

Operation after detection

The error is remedied, then the unit operates normally.

Displays until pressing any button.

Removes cassette tape automatically.

Display until inserting a cassette tape again.

Operation after detection

Main Code 2X: Mechanical control system problem
Main Code 20
Sub Code	Detection	Operation after detection	Valid mode	Display
018	It is detected that the current of the cassette up/down motor is not normal.	AUTO OFF	EJECT (Emergency EJECT)	Display until pressing any button or until inserting a cassette tape again.
111	The operation of cassette down is not completed within the specified time.	Removes cassette tape automatically.	-
911	The operation of cassette up is not completed within the specified time;.	AUTO OFF	Inhibits all modes.

Main Code 21
Sub Code	Detection	Operation after detection	Valid mode	Display
0C8	It is detected that the current of the reel position motor is not normal.	AUTO OFF	EJECT (Emergency EJECT)	Display until pressing any button or until inserting a cassette tape again.
1C1	The driving of the reel position is not completed within the specified time.	Removes cassette tape automatically.	-

Main Code 3X : Sensors problem
The sub code of the main code 3X is 000.
Main Code	Detection	Operation after detection	Valid mode	Display
30	Tape-top and tape-end are detected at the same time.	STOP	PLAY, EJECT	Displays until an error is clear up.
31	Tape-top is not released.	STOP	PLAY, FF, EJECT
32	Tape-top is not released.	STOP	PLAY, REW, EJECT
33	The reel position sensor detects the L position and S Position at the same time.	Inhibits inserting a cassette tape.

Main code 9X : Communication and interface systems problem
Main Code	Sub Code	Detection
91	125	Interface problem detected between system control and keyboard.
	138	Problem detected in the hours meter data EEPROM.
	145	Initialization problem detected between system control and servo.
	165	Interface problem detected between system control and TBC.
	436	Problem detected in servo adjustment data EEPROM.
	455	Interface problem detected between main servo and sub servo.
92	000	1/2 VD signal at system control input cannot be detected.
93	000	Servo reference sync signal cannot be detected.
94	000	Servo input sync signal cannot be detected.

Main code 06
Sub Code	Detection	Operation after detection	Valid mode	Display
6A7	It is detected that the tape tension is not normal in PLAY or REC mode.	Continues operating in the mode in which the problem is detected. When enters other than PLAY or REC mode, AUTO OFF.	The error is remedied, then the unit operates normally. In PLAY or REC mode: Continues operating. In other than PLAY or REC mode: STOP. then EJECT. (Emergency EJECT)	Displays until the error is remedied and pressing any button.

UVW SERIES ERROR CODES
Main Code 02
Sub Code	Detection	Operation after detection	Valid mode	Display
058	It is detected that the current of the S reel motor is not normal.	AUTO OFF	EJECT (Emergency EJECT)	Display until pressing any button or until inserting a cassette tape again.
078	It is detected that the current of the T reel motor is not normal.	AUTO OFF	EJECT (Emergency EJECT)
154	The S reel FG cannot be detected by FG check when inserting a cassette tape.	Removes cassette tape automatically.	-
174	The T reel FG cannot be detected by FG check when inserting a cassette tape.
194	Neither S reel FG nor T reel FG can be detected by FG check when inserting a cassette tape.
255	The S reel FG is detected in threading.	AUTO OFF	EJECT (Emergency EJECT)
274	The T reel FG cannot be detected in threading.
355	The S reel FG is detected in STOP or STILL mode.
375	The T reel FG is detected in STOP or STILL mode.
395	The S reel FG and T reel FG are detected in STOP or STILL mode.
402	It is detected that the tape does not run at the specified speed in F. FWD or REW mode.	STOP	Error is remedied, then the unit operates normally.	Displays until pressing any button.
403	The Slack of the tape is detected in F. FWD or REW mode.	AUTO OFF	EJECT (Emergency EJECT)	Display until pressing any button or until inserting a cassette tape again.
454	The S reel FG cannot be detected in F. FWD or REW mode.
474	The T reel FG cannot be detected in F. FWD or REW mode.
494	Neither S reel FG nor T reel FG can be detected in F. FWD or REW mode.
496	It is detected that the rotations of S and T reel are not normal in F. FWD or REW mode.
503	The slack of the tape is detected in SEARCH mode.
554	The S reel FG cannot be detected in SEARCH mode.
574	The T reel FG cannot be detected in SEARCH mode.
594	Neither S reel FG nor T reel FG can be detected in SEARCH mode.	AUTO OFF	EJECT (Emergency EJECT)	Display until pressing any button or until inserting a cassette tape again.
596	It is detected that the rotations of S and T reel are not normal in SEARCH mode.
603	The slack of the tape is detected in PLAY or REC mode.
654	The S reel FG cannot be detected in PLAY or REC mode.
674	The T reel FG cannot be detected in PLAY or REC mode.
694	Neither S reel FG not T reel FG can be detected in PLAY or REC.
696	It is detected that the rotations of S reel and T reel are not normal in PLAY or REC.
803	The slack of the tape is detected when unthreading.
855	The S reel FG is detected when unthreading.
874	The T reel FG cannot be detected when unthreading.
A55	The S reel FG is detected during removal of a cassette tape.	Until the error is remedied, inhibits inserting a cassette tape.
A75	The T reel FG is detected during removal of a cassette tape.
A95	The S reel FG and T reel FG are detected during removal of cassette tape.

Main Code 09
Sub Code	Detection	Operation after detection	Valid mode	Display
028	It is detected that the current of the threading motor is not normal.	AUTO OFF	EJECT (Emergency EJECT)	Display until pressing any button or until inserting a cassette tape again.
209	When detects full top or end of a tape in the threading state and then performs SHORT FF/SHORT REW, top or end is not released.	Removes cassette tape automatically.	-
221	Threading is not completed within the specified time.	AUTO OFF	EJECT (Emergency EJECT)
821	Unthreading is not completed within the specified time.	AUTO OFF	EJECT (Emergency EJECT)

Main Code 07
Sub Code	Detection	Operation after detection	Valid mode	Display
042	It is detected that the speed of the capstan is not normal.	STOP	The error is remedied, then the unit operates normally.	Displays until pressing any button.
144	The capstan FG cannot be detected by FG check when inserting a cassette tape.	Removes cassette tape automatically.	-	Display until inserting a cassette tape again.

Main Code 08
Sub Code	Detection	Operation after detection	Valid mode	Display
03A	It is detected that the speed of the drum is not normal. ERROR DRUM SPEED ERROR HAS BEEN DETECTED WAIT UNTIL THIS INDICATION GOES OFF.	RETRY (Once unthreading, then threading again.)	EJECT	Displays until the error is remedied.
032	The drum speed problem is not remedied.	AUTO OFF	EJECT	Displays until inserting a cassette tape again.